Polara Field Service App2.5.1 - App Store
You'll be able to see results in few seconds.
Publisher Description
The Polara Field Service App can be used by authorized personnel to setup and configure Polara's iNavigator and iNavigator S Accessible Pedestrian Station (APS) devices. Using this app, it is possible to set volume settings, sound options, and other behavioral characteristics of the APS as well as upload audio messages and update the firmware in the APS.
Version History Add compatibility with latest hardware revision of iCCU-S2. 2.5.1 May 7 - Change text instances of PBS to APS.
- Add ability to enable Sleep Mode feature via GPIn setting or Quiet Time setting.
- Fixed issue with sending custom audio files to iNav devices. 2.5.0 10/29/2025 Support BLE user access enable/disable for WPC/WPSE units.
Add ability to save/load settings files for iNX units.
Includes other minor fixes. 2.4.0 07/16/2025 Users can upload custom audio files on units with latest firmware (iNS v5.2.0, iCCU v4.03 / iNav v4.20).
Notification when a new version of the app is available.
Add ability to disable user access to units over Bluetooth. v2.3.0 05/20/2025 Increased minimum password complexity requirements. 2.2.0 04/27/2025 Increase performance of firmware update with v5.1.0 and greater. Fix issue causing the Load Switch Interval Status dialog to list assigned phases as Unassigned when phases are assigned to different channels than default. Fixed some cosmetic issues in the Phase Setup screen. 2.1.3 02/11/2025 Added a new live signal strength view to the WPC info page while connected to WPS. Add detection of a running network-initiated firmware update and abort command. Standardize the naming of Preemption options. Add better instructional text upon iNS firmware update failure. Fix display aberrations in LED Flash function of Intersection Status screen. Includes other minor internal bugfixes. 2.1.2 12/02/2024 Added a mechanism to auto-update help documents, require accepting a Software License Agreement, added QuietTime and updated MUTCD audio files on iNX v1.1.0, BIU on channels 5-8 with iCCU v3.99, Connect and configure WPSE units, and several minor interactivity improvements. 2.1.1 03/18/2024 Added compatibility with the new Wireless Ped Connector (WPC) product. Add new iCCU features (Auto-Reset and Advanced SDLC/BIU Load Switch Address). 2.1.0 09/25/2023 Fixed issue with saving PedApp Intersection Info on 2-Wire units. Fixed crash when attempting to open files when no files have yet been imported. Moved LED Flash Guide to the top of the Help Documents list. 2.0.17 04/06/2023 Updated the look of the icon. Add note to check your spam folder for the verification email after creating a new account.
Recent Updates:
Added the ability to search the Polara Audio Library from within the app. Requires signing up for a free Polara account for access. Added a direct link to call Polara Tech Support from within the Help screen. Fixed issue which could cause a firmware update to stop if navigating away from the app while updating (ie. accepting a phone call). 2.0.16 01/17/2023 Added the ability to search the Polara Audio Library from within the app. Requires signing up for a free Polara account for access. Added a direct link to call Polara Tech Support from within the Help screen. Fixed issue which could cause a firmware update to stop if navigating away from the app while updating (ie. accepting a phone call). 2.0.15 12/23/2022 Added the ability to mark certain firmware files as recalled. 2.0.14 08/16/2022 This release fixes a few minor issues which could cause a warning dialog box to appear when no error has actually occurred.
Make some minor improvements to the latest firmware checking feature. 2.0.13 07/12/2022 - Enhanced Help screen with new YouTube videos. Also, help buttons appear on all pages with quick links to any applicable videos.
- Enhanced Firmware Update notification and auto-download of latest firmware
- As soon as new firmware is available, users get a notification next time the app is opened of a new firmware release and the changes to that firmware.
- In the Main Menu, a warning icon is present whenever there is a new firmware update available for the connected unit.
- In the Firmware Update screen, you can update to the latest firmware with a single click instead of having to select the specific firmware file you want to use. Also, the release history is readily visible for the firmware.
- When saving the Intersection Info (Streets and Phases) while setting up PedApp for 2-Wire units, the information is automatically saved to all connected iNS2 units, so you don’t have to go to each individual unit to load and save the Intersection Info.
- Adds the ability to detect when another user has connected to an iNS unit via BLE and shows the entry in red so that only one user can connect to it at a time (iNS v4.0.16+ units).
- Adds the ability to enable/disable the PedApp feature via a toggle switch in the PedApp Settings screen.
- Adds the ability to enable/disable the external button feature.
- Several additional minor bugfixes have been incorporated to increase program stability. 2.0.12 06/03/2022 - Bundle updated iCCU firmware v3.94 & iNX firmware v1.0.5.
- Add updated iNS2 manual and iNX manual.
- Add ability to enable counter logging on iNX units. 2.0.10 07/19/2021 - Bundle updated iCCU firmware v3.93
- Change iDetect Rain Detect feature to default to off.
- Fix issue that could cause the incorrect current Rain Detect setting to be displayed on factory fresh units. 2.0.9 04/23/2021 - Bundle updated manuals and firmware.
- Add ability to enable ped call logging on iCCU units (v3.91 or greater).
- Add Rain Lockout option to iDetect settings (Profile 1 only) (v4.0.13 or greater).
- Add display of expanded button counts (v4.13/v4.0.13 or greater).
- Add Save to All feature for iDetect. This allows the settings for iDetect to be simultaneously set for all iDS2 units on the PLC network.
- Add warning if user attempts to export health log when health log has not yet been read from the unit (to prevent accidental empty exported logs). 2.0.8 04/09/2021 - Bundle updated manuals and firmware.
- Clarify setup of PedApp Intersection Information.
- Add ability to enable iDetect Profile One with greater sensitivity.
- Add ability to select PLC Channel C in Advanced Communications Settings (for units with latest firmware).
- Changes for iDX units:
- Add compatibility with new iDetect iDX units.
- Clarify wording on iDX Speech Message options.
- Changed default audio messages. Go to Audio Update and Select Reset Audio to Default from options menu to get the updated defaults (This will override any customized uploads).
- Add iNX/iDX Counters for Presses and Activations. 2.0.7 01/23/2021 - Add compatibility with new iDetect (iDS) units.
- Add ability to change iDetect Settings.
- Compatible with units with BLE encryption (v4.0.11 or greater).
- BLE connection screen auto-updates new found devices and removes out-of-range devices.
- Added compatibility with iOS 14.
- Bundled new firmware and manuals. 2.0.5 11/17/2020 - Add compatibility with new iNX (Mid-Block Crossing) units (iOS 11 or later).
- Revamped File Browser (and file selector) for better visibility and organization.
- Streamlined firmware update process for iNS units to reduce processing and upload time.
- Add instructions on remedy of possible connection issue with iNavs on iOS 13.4 or later and bundle iNav firmware to remedy connection issue.
- Also includes additional minor bugfixes. 2.0.4 05/22/2020 Major update with new menu structure.
Add support for new iNavigator S (iNS) units.
Support iPhone X & 11 and iOS 13 Dark Mode.
App is now universal and natively runs on iPad as well as iPhone. 2.0.2 01/25/2020 Quick update:
- Fix issue with importing ogg files.
Previous update:
- Bundle new v3.89 iCCU firmware.
- Fix issue with connecting to iCCU Wifi on iOS 13.
- Auto-Hide home bar where it interferes with on-screen info on iPhone X/XS/11 devices. 1.13.12 10/24/2019 - Bundle new v3.89 iCCU firmware.
- Fix issue with connecting to iCCU Wifi on iOS 13.
- Auto-Hide home bar where it interferes with on-screen info on iPhone X/XS/11 devices. 1.13.11 10/17/2019 - Bundle new v3.207 iNx firmware.
- Updated manuals.
- Updated database of health log entries. 1.13.10 05/29/2019
About Polara Field Service App
The company that develops Polara Field Service App is Polara Engineering, Inc.. The latest version released by its developer is 2.5.1.
To install Polara Field Service App on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Polara Field Service App as malware if the download link is broken.
How to install Polara Field Service App on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the Polara Field Service App is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After Polara Field Service App is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 2.5.1
posted on 2026-10-14
Version History Add compatibility with latest hardware revision of iCCU-S2. 2.5.1 May 7 - Change text instances of PBS to APS.
- Add ability to enable Sleep Mode feature via GPIn setting or Quiet Time setting.
- Fixed issue with sending custom audio files to iNav devices. 2.5.0 10/29/2025 Support BLE user access enable/disable for WPC/WPSE units.
Add ability to save/load settings files for iNX units.
Includes other minor fixes. 2.4.0 07/16/2025 Users can upload custom audio files on units with latest firmware (iNS v5.2.0, iCCU v4.03 / iNav v4.20).
Notification when a new version of the app is available.
Add ability to disable user access to units over Bluetooth. v2.3.0 05/20/2025 Increased minimum password complexity requirements. 2.2.0 04/27/2025 Increase performance of firmware update with v5.1.0 and greater. Fix issue causing the Load Switch Interval Status dialog to list assigned phases as Unassigned when phases are assigned to different channels than default. Fixed some cosmetic issues in the Phase Setup screen. 2.1.3 02/11/2025 Added a new live signal strength view to the WPC info page while connected to WPS. Add detection of a running network-initiated firmware update and abort command. Standardize the naming of Preemption options. Add better instructional text upon iNS firmware update failure. Fix display aberrations in LED Flash function of Intersection Status screen. Includes other minor internal bugfixes. 2.1.2 12/02/2024 Added a mechanism to auto-update help documents, require accepting a Software License Agreement, added QuietTime and updated MUTCD audio files on iNX v1.1.0, BIU on channels 5-8 with iCCU v3.99, Connect and configure WPSE units, and several minor interactivity improvements. 2.1.1 03/18/2024 Added compatibility with the new Wireless Ped Connector (WPC) product. Add new iCCU features (Auto-Reset and Advanced SDLC/BIU Load Switch Address). 2.1.0 09/25/2023 Fixed issue with saving PedApp Intersection Info on 2-Wire units. Fixed crash when attempting to open files when no files have yet been imported. Moved LED Flash Guide to the top of the Help Documents list. 2.0.17 04/06/2023 Updated the look of the icon. Add note to check your spam folder for the verification email after creating a new account.
Recent Updates:
Added the ability to search the Polara Audio Library from within the app. Requires signing up for a free Polara account for access. Added a direct link to call Polara Tech Support from within the Help screen. Fixed issue which could cause a firmware update to stop if navigating away from the app while updating (ie. accepting a phone call). 2.0.16 01/17/2023 Added the ability to search the Polara Audio Library from within the app. Requires signing up for a free Polara account for access. Added a direct link to call Polara Tech Support from within the Help screen. Fixed issue which could cause a firmware update to stop if navigating away from the app while updating (ie. accepting a phone call). 2.0.15 12/23/2022 Added the ability to mark certain firmware files as recalled. 2.0.14 08/16/2022 This release fixes a few minor issues which could cause a warning dialog box to appear when no error has actually occurred.
Make some minor improvements to the latest firmware checking feature. 2.0.13 07/12/2022 - Enhanced Help screen with new YouTube videos. Also, help buttons appear on all pages with quick links to any applicable videos.
- Enhanced Firmware Update notification and auto-download of latest firmware
- As soon as new firmware is available, users get a notification next time the app is opened of a new firmware release and the changes to that firmware.
- In the Main Menu, a warning icon is present whenever there is a new firmware update available for the connected unit.
- In the Firmware Update screen, you can update to the latest firmware with a single click instead of having to select the specific firmware file you want to use. Also, the release history is readily visible for the firmware.
- When saving the Intersection Info (Streets and Phases) while setting up PedApp for 2-Wire units, the information is automatically saved to all connected iNS2 units, so you don’t have to go to each individual unit to load and save the Intersection Info.
- Adds the ability to detect when another user has connected to an iNS unit via BLE and shows the entry in red so that only one user can connect to it at a time (iNS v4.0.16+ units).
- Adds the ability to enable/disable the PedApp feature via a toggle switch in the PedApp Settings screen.
- Adds the ability to enable/disable the external button feature.
- Several additional minor bugfixes have been incorporated to increase program stability. 2.0.12 06/03/2022 - Bundle updated iCCU firmware v3.94 & iNX firmware v1.0.5.
- Add updated iNS2 manual and iNX manual.
- Add ability to enable counter logging on iNX units. 2.0.10 07/19/2021 - Bundle updated iCCU firmware v3.93
- Change iDetect Rain Detect feature to default to off.
- Fix issue that could cause the incorrect current Rain Detect setting to be displayed on factory fresh units. 2.0.9 04/23/2021 - Bundle updated manuals and firmware.
- Add ability to enable ped call logging on iCCU units (v3.91 or greater).
- Add Rain Lockout option to iDetect settings (Profile 1 only) (v4.0.13 or greater).
- Add display of expanded button counts (v4.13/v4.0.13 or greater).
- Add Save to All feature for iDetect. This allows the settings for iDetect to be simultaneously set for all iDS2 units on the PLC network.
- Add warning if user attempts to export health log when health log has not yet been read from the unit (to prevent accidental empty exported logs). 2.0.8 04/09/2021 - Bundle updated manuals and firmware.
- Clarify setup of PedApp Intersection Information.
- Add ability to enable iDetect Profile One with greater sensitivity.
- Add ability to select PLC Channel C in Advanced Communications Settings (for units with latest firmware).
- Changes for iDX units:
- Add compatibility with new iDetect iDX units.
- Clarify wording on iDX Speech Message options.
- Changed default audio messages. Go to Audio Update and Select Reset Audio to Default from options menu to get the updated defaults (This will override any customized uploads).
- Add iNX/iDX Counters for Presses and Activations. 2.0.7 01/23/2021 - Add compatibility with new iDetect (iDS) units.
- Add ability to change iDetect Settings.
- Compatible with units with BLE encryption (v4.0.11 or greater).
- BLE connection screen auto-updates new found devices and removes out-of-range devices.
- Added compatibility with iOS 14.
- Bundled new firmware and manuals. 2.0.5 11/17/2020 - Add compatibility with new iNX (Mid-Block Crossing) units (iOS 11 or later).
- Revamped File Browser (and file selector) for better visibility and organization.
- Streamlined firmware update process for iNS units to reduce processing and upload time.
- Add instructions on remedy of possible connection issue with iNavs on iOS 13.4 or later and bundle iNav firmware to remedy connection issue.
- Also includes additional minor bugfixes. 2.0.4 05/22/2020 Major update with new menu structure.
Add support for new iNavigator S (iNS) units.
Support iPhone X & 11 and iOS 13 Dark Mode.
App is now universal and natively runs on iPad as well as iPhone. 2.0.2 01/25/2020 Quick update:
- Fix issue with importing ogg files.
Previous update:
- Bundle new v3.89 iCCU firmware.
- Fix issue with connecting to iCCU Wifi on iOS 13.
- Auto-Hide home bar where it interferes with on-screen info on iPhone X/XS/11 devices. 1.13.12 10/24/2019 - Bundle new v3.89 iCCU firmware.
- Fix issue with connecting to iCCU Wifi on iOS 13.
- Auto-Hide home bar where it interferes with on-screen info on iPhone X/XS/11 devices. 1.13.11 10/17/2019 - Bundle new v3.207 iNx firmware.
- Updated manuals.
- Updated database of health log entries. 1.13.10 05/29/2019
Disclaimer
Official App Store Link
We do not host Polara Field Service App on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Polara Field Service App is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
